Navigation:  ENERCALC SEL > General Operation >

Specifying the Default Governing Code for Future Project Files

 Previous pageReturn to chapter overviewNext page

Last revised: Friday, April 3, 2026 at 05:28 PM

How do I specify the default Governing Code for future Project Files?

 

1.Open the project you want to modify and expand the General Division in the Project Manager.

2.Double-click the Building Code Information option.

3.In Governing Code & Design Standards, configure the desired Building Code and referenced standards.

4.Click Set Default Codes and Standards for New Projects.

 

All new Project Files created after this change will use the selected governing code and standards automatically. Existing Project Files are not affected.